The electrical system has 4 fuses located inside the battery compartment to protect the different circuits
of the system.
The chart shows the position and characteristics of the fuses in the vehicle.
CAUTION
BEFORE REPLACING A BLOWN FUSE, FIND AND SOLVE THE FAILURE THAT CAUSED IT TO
BLOW. NEVER TRY TO REPLACE THE FUSE WITH ANY OTHER MATERIAL (E.G., A PIECE OF
ELECTRIC WIRE).
FUSE TABLE
Specification Desc./Quantity
1 Fuse No. 1
Position on fuse box: 4
Capacity: 3A
Protected circuits: Front and rear tail light
bulbs and license plate light
Location: battery compartment
2 Fuse No. 2
Position on fuse box: 3
Capacity: 7.5 A
Protected circuits: Stop light bulbs, engine
start-up control, horn, instrument panel
Location: battery compartment
3 Fuse No. 3
Position on fuse box: 2
Capacity: 7.5 A
Protected circuits: High- and low-beam
light bulbs.
Location: battery compartment
4 Fuse No. 4
Position on fuse box: 1
Capacity: 20A
Protected circuits: System protection main
fuse
Location: battery compartment
Fuses Runner 125 - 200
- 104