PIAGGIO Runner 125 - Frame and suspensions; Brakes; Wheels and tyres; Carburettor

Frame and suspensions
FRAME AND SUSPENSIONS
Specification Desc./Quantity
Chassis Modular double cradle frame made of welded tubular steel with
sheet metal reinforcement.
Front suspension hydraulic double-acting telescopic fork with 35 mm stems
Rear suspension With coaxial spring and hydraulic shock absorber. Chassis to
engine support with swinging arm.
Brakes
BRAKES
Specification Desc./Quantity
Front brake Ø 240 mm disc brake (vehicle LHS), with hydraulic control ac-
tivated by handlebar right lever.
Rear brake
Ø 220 mm disc brake with twin plunger callipers,
with hydraulic control by a handlebar left lever.
Wheels and tyres
WHEELS AND TYRES
Specification
Desc./Quantity
Front wheel
3.00 x 14" light alloy rim
Front tyre Tubeless, 120/70-14'' 55P
Rear wheel
3.50 x 13" light alloy rims
Rear tyre Tubeless, 140/60 - 13'' 63P
TYRE PRESSURE
Specification
Desc./Quantity
Front wheel pressure: 1.7 bar
Rear tyre pressure 2 bar
Rear tyre pressure - driver and passenger 2.2 bar
Carburettor
125cc Version
Kehin
KEHIN CVEK-30 CARBURETTOR
Specification
Desc./Quantity
Depression carburettor CVEK-30
Body stamping CVK
Stamping 306D
Max. jet 98
Minimum jet 35
Max. air jet 70
Minimum air jet 130
Throttle valve spring 100 ÷ 160 g
Characteristics Runner 125 - 200
CHAR - 12