2-1Operating Manual: PSS SB 3006-3 Series
Overview
A PSS from the PSS SB2 3006-3 series is a complete programmable
safety system in a single unit. The following are all integrated into the
housing:
• Power supply
• CPU
• 6 integral on-board inputs
• 2 test pulse outputs
• Programming device interface
(combined RS 232/RS 485 interface)
• User interface
(combined RS 232/RS 485 interface)
• 2 interfaces for connection to SafetyBUS p
• Interface(s) for connection to various standard bus systems
The integral on-board inputs can be used to monitor local emergency
stops or to trigger an I/O-Group start, for example. They are suitable for
connecting single or dual-channel input devices, with or without test
pulses. The dedicated test pulse outputs are suitable for testing input
devices.
SafetyBUS p enables you to establish a safe decentralised network of
several programmable safety systems and/or to connect decentralised
modules. The PSS can perform the function of a Management, Logic or
Input/Output Device on SafetyBUS p.
For non-safety-related applications, the PSS can be connected to various
standard bus systems (e.g. Ethernet, PROFIBUS-DP, INTERBUS,
ControlNet, DeviceNet). The bus interfaces that are available will depend
on the unit type.
INFORMATION
• The standard bus interfaces are described in separate operating
manuals. The necessary operating manuals are supplied with the
relevant unit types.
• Drivers (standard function blocks) from the corresponding Pilz software
package will be required in order to connect to the various standard bus
systems.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
