Safety
3-2 Operating Manual: PSS SB 3006-3 Series
The following is deemed improper use:
• Any component, technical or electrical modification to the safety system
• Use of the safety system outside the areas described in this manual
• Use of the safety system outside the documented technical details (see
chapter entitled “Technical Details”).
Intended use includes making the installation EMC-compliant. Please
observe the guidelines given in this manual and in the “Safety Manual” for
the PSS-range. The „Safety Manual“ also includes check lists designed to
help you with the safety-related planning, construction and operation of a
plant.
Product modifications
Details of the changes made to a unit from one version to the next are
described in the “Product Modifications” file. This file can be found on the
“Documentation PSS-Range/SafetyBUS p” CD or on the Internet
(www.pilz.com) with the unit’s documentation.
Categories in accordance with EN 954-1
WARNING!
Please note: To achieve the corresponding category or requirement class,
the whole system including all safety-related components (parts, devices,
user program etc.) must be included in the assessment. For this reason,
Pilz cannot accept liability for the correct classification into a category or
requirement class.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
