3-1Operating Manual: PSS SB 3006-3 Series
Safety
Intended use
Programmable safety systems from the PSS SB2 3006-3 series are
intended for use as follows:
• Safety-related applications
in the failsafe section of the PSS, including connection to SafetyBUS p
• Non-safety-related applications
in the standard section of the PSS, including connection to standard bus
systems.
INFORMATION
The following system software is required in order to program the safety
systems:
• PSS WIN-PRO from Version 1.3.0 for
- PSS SB2 3006-3 DP-S
- PSS SB2 3006-3 IBS-S
- PSS SB2 3006-3 CN-A
- PSS SB2 3006-3 DN-S
- PSS SB2 3006-3 ETH-2
- PSS SB2 3006-3 ETH-2 DP-S
- PSS SB2 3006-3 ETH-2 IBS-S
INFORMATION
Drivers (standard function blocks) from the corresponding Pilz software
package will be required in order to connect to the various standard bus
systems:
• ST-SB-DP-S: Driver for PROFIBUS-DP Slave
• ST-SB-ControlNet: Driver for ControlNet Adapter
• ST-SB-DN-S: Driver for DeviceNet Slave
• ST-SB-IBS-S: Driver for INTERBUS Slave
For the standard bus interface ETH-2, the Ethernet Configurator is
available as part of the PSS WIN-PRO system software from Version
1.3.0.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
