Hunter-Pro Series - User Guide
PIMA Alarm Systems Ltd.
6.3.1 All Zones Status Display
NEXTNEXT
.…
C--___BB-- 1
->10
-F-
-S_----
11->20
1 2 3 4 5 6 7 8 9 10 1 1 1 2 13 14 1 5 1 6
17 18 19 20 2 1 22 2 3 24 25 26 27 2 8 29 3 0 31 32
--C----C--21->30
-__--B---_31->40
17 1 8 19 2 0 21 2 2 23 24 25 26 2 7 28 2 9 30 3 1 32
1 2 3 4 5 6 7 8 9 10 1 1 1 2 13 14 1 5 1 6
17 1 8 19 2 0 21 2 2 23 24 25 26 2 7 28 2 9 30 3 1 32
Zones
-
_
-- 144>
1 2 3 4 5 6 7 8 9 10 1 1 1 2 13 14 1 5 1 6
The Fast 32 zone display, extended to all the zones. The zones are displayed 10 per line,
20 per screen.
or to scroll.
7. KEY #6: TELEPHONE NUMBERS, SMS SETTINGS
& DIALER TEST
Master code
Edit Numbers
ENTER/NEXT/END
Edit Numbers
ENTER/NEXT/END
Edit Numbers
ENTER/NEXT/END
7.1 Edit telephone numbers
Master code
Edit Numbers
ENTER/NEXT/END
Edit Numbers
ENTER/NEXT/END
E d i t N u m b e r s
E N T E R / N E X T / E N D
The Hunter-Pro Series integrated dialer can call up to 4 telephone numbers to sound a
synthesized alarm or a pre-recorded voice message (by the VU-20U voice module). It can
also sound a listen-in microphone (the MIC-200).
The dialer attempts to dial each number twice (except numbers that receive SMS
messages, to which a single attempt is performed). It aborts the dialing attempts in the
following cases:
The system is disarmed;
A “Stop Dialer” command is received over the telephone;
All numbers were dialed, each number twice (even if the calls were answered).
Calls that report on faults, are not followed up by “back to normal” calls.