Hunter-Pro Series - User Guide
PIMA Alarm Systems Ltd.
For example:
User 17 can disarm the system only between 07:30 and 09:30 (AM). Any attempt of this
user to disarm at any other time, even a minute later or earlier, will be denied and the
system will remain armed.
9.9 User partitions
In a system divided into partitions, users can be restricted to some partitions, i.e., be able
to operate only the keypads that are allocated to the those partitions.
A useful implementation of this feature can be where some premises share the same
system: each premises is operated only by its keypads & users.
Master Code
User Codes
ENTER/NEXT/END
User 1 (1) *
ENTER/NEXT/END
Partitioning
ENTER/NEXT/END
Part. For User1
++++++++++++++++
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
By default, every user can operate every partition. Therefore, you should disable the
partitions this user will be restricted from operating to disable (set to „-‟)/enable
a partition / to move the cursor
To enable a user to control its partition/s from any keypad, enable
parameter “K” in the “User settings9.7”. See section 9.7.
A partition can be assigned to one or more users. By default, all the
users are assigned to all the partitions.
9.10 Key fob
9.10.1 Adding a key fob to a user
Master Code
User Codes
ENTER/NEXT/END
User 1 (1) *
ENTER/NEXT/END
Add Keyfob ?
ENTER/NEXT/END
Add Keyfob ?
Activate device
Press one of the Key fob‟s buttons and wait for
confirmation message:
To Next Page
Loading...