Pima 896 User Manual

Hunter-Pro Series - User Guide
21
PIMA Alarm Systems Ltd.
9.2.2 Deleting a User code
 Master code 
User Codes
ENTER/NEXT/END

User 1 (1) *
ENTER/NEXT/END
 User number 
Delete Code
ENTER/NEXT/END

Code deleted
Press END

9.3 The Duress code
 As implied by its name, the duress code is a to be used in stress situations, such in the
case of being under threat.
 Entering the code disarms the system
2
and sends a silent alarm to both the Central
Monitoring Station (where relevant) and the phone numbers.
 The duress code is a 4 to 6 digits number. Tip: precede your own user code with the
number 1 (or any else) to remember the code easier.
 Master Code 
Duress Code
ENTER/NEXT/END

Duress Code
****** (4-6)
 4-6 digits  
9.4 The Short code
 The Short code is a 2 digit arming only code.
 Master Code 
Short Code
ENTER/NEXT/END

Short Code
**
 2 digits  
9.5 The Door code
 The door code is used to trigger doors and gates relays.
 Master Code  
Door Code
****** (4-6)
 4-6 digits 

9.6 The User name
 See “Entering names and characters”, section 13.1.
 Master code  
User Codes
ENTER/NEXT/END

User 1 ( 1) *
ENTER/NEXT/END
2
The code is active if the system is disarmed too.
9
CODES
NEXT
ENTR
ENTR
NEXT
ENTR
END
9
CODES
NEXT
NEXT
ENTR
ENTR
END
9
CODES
NEXT
NEXT
NEXT
ENTR
ENTR
END
9
CODES
BACK
ENTR
ENTR
END
9
COD ES
NEXT
ENTR

Pima 896 Specifications

General

Brand	Pima
Model	896
Category	Carbon Monoxide Alarm
Language	English