Pima 896 - User Settings; Disarming Time Window

22
Hunter-Pro Series - User Guide
PIMA Alarm Systems Ltd.
 User number 
Entr/Change Code
ENTER/NEXT/END

User Name
ENTER/NEXT/END

User Name 1
User 1
 Enter a name  
9.7 User settings
 The user access authorizations are determined in a single screen:
 Master Code  
User Codes
ENTER/NEXT/END

User 1 (1) *
ENTER/NEXT/END
 User number 
User Settings
ENTER/NEXT/END

UTCMBKAORW
++++++-+--- 1
 to enable (set to „+‟) /disable a parameter  / to
move the cursor  
Par.
Onscreen
Authorization/Restriction
U
Code Programming
Set/Edit User codes
T
Tel. Programming
Set/Edit telephone numbers
C
Date Programming
Set/Edit time and date
M
Memory view
View the memory log
B
Zone Bypass
Temporary bypass zones
K
Use any Keypad
Use all the keypads (in a system divided to partitions)
A
Auto-arming Prog
Set/Edit auto-arming time
O
OP/CL Report-SMS
Receive Arm/Disarm reports by SMS
R
Remote control
Remote control the system via touch-tone telephone
W
RFID tag + Code
Force code entering when using RFID tag/key chain.
 If a User tries to perform an action it is not unauthorized to, an “Access Denied” message
is displayed.
9.8 Disarming time window
 A user can be restricted from disarming the system outside a time frame. Arming,
however, is not restricted in any way.
 Master Code  
User Codes
ENTER/NEXT/END
  User number
User 1 ( 1) *
ENTER/NEXT/END
  X4
Disarm Window
ENTER/NEXT/END

User 1
00:00 To 23:59
Enter start and end window time in HH:MM format  

ENTR
NEXT
NEXT
ENTR
ENTR
END
9
COD ES
NEXT
ENTR
ENTR
NEXT
NEXT
NEXT
ENTR
NEXT
BACK
ENTR
END
9
COD ES
NEXT
ENTR
ENTR
NEXT
ENTR
ENTR
END