Pima 896 User Manual

Hunter-Pro Series - User Guide
9
PIMA Alarm Systems Ltd.
Key
Option 1: enter the Master or user
code and press a key
Option 2: simply press a key for 3
seconds
-
Suppress the keypad chime
Display the system‟s name & version
Display the “Service Provider”
Start automatic tests
-
-
Display the system‟s name & version
Keys combinations (in any of the above 2 options)
+
Press together to generate PANIC alarm
+
Press together briefly at any time: completely turn ON/OFF the
keypad chime
2. KEY #1: ARMING & DISARMING
The system can be armed and disarmed in 4 ways:
1) By the Keypad;
2) By remote control, Key fob or key switch;
3) Automatically (arming only);
4) Remotely, via Touch-tone telephone or the COMAX application.
As a rule, the system should be armed only when all zones are closed,
except delayed zones (those on the exit route), and there are no faults
(e.g., low battery, mains)
1
.
 You cannot arm the system with open zones. In the “Fast zone display” mode (see section 5)
they are indicated with a rectangle _ . Close zones are indicated with a horizontal line. In the
“Scan open zones” mode, open zones are indicated with „OP: Zone X‟, like zone #15 in the
next example:
2.1 The arming procedure
For convenience reasons, the Master code is used in all the programming
examples for accessing the User menu. The alternative way to do it is: 
 authorized User code
  Master code
System Armed!
-OR-
Master code
User Menu
Select 1,2...

System Armed!
 The Exit delay countdown starts, the keypad chime sounds beeps and the ARMED LED flashes.
1
To enable auto-arming with open zones and faults, ask your Installer.
END
NEXT
BACK
ENTR
#
ENTR
END
14 SEP 07 09:55
OP:ZONE 15
1
ON/OFF

Pima 896 Specifications

General

Brand	Pima
Model	896
Category	Carbon Monoxide Alarm
Language	English