1) Manual:
▪ Serial no.: the device’s serial number.
▪ Enroll: press to enroll the arming station.
2) Auto: the selected arming station is the next available one. Press * or # to
scroll. For 1-way (KAS143) – press the enrollment button on the device.
For 2-way (KAS743) – press on . Note: refer also to the
specific manual of KAS743
▪ Status: the system is waiting for a signal, or displays the received
arming station/s.
▪ Enroll: press to enroll the arming station, or, if multiple devices are
received, scroll between them using the left-right arrow keys and
press
Enroll
.
1) Delete: press * or # to select a device.
▪ Delete the selected arming station.
2) Delete All: delete all the defined arming stations.
1) Partitions: for each arming station, select its allocated partitions.
2) Name: user text, up to 28 characters.
1) You can use only 4-digits codes
2) Up to 4 unit can be installed in the system.
3) See the KAS743 manual for full details.
To Next Page
Loading...
