3: Peripherals
9
▪ Sirens
1) Manual:
▪ Serial no.: the siren’s serial number.
▪ Enroll: press to enroll the selected siren.
2) Auto: for 1-way (SRO143) press the siren’s enrollment button. For 2-way
(SRo743) press the tamper switch for at least 3 seconds. See the SRO743
for detailed description.
▪ Status: the system is waiting for a signal, or displays the received
siren.
▪ Enroll: press to enroll the selected siren.
1) Delete: press * or # to select a user.
▪ Delete the selected siren.
2) Delete All: delete all the defined sirens.
1) Manual:
▪ Serial no.: the repeater’s serial number.
▪ Enroll: press to enroll the repeater.
2) Auto: the selected repeater is the next available one. Press * or # to scroll,
and press the enrollment button on the repeater.
▪ Status: the system is waiting for a signal, or displays the received
repeater/s.
▪ Enroll: press to enroll the repeater, or, if multiple repeaters are
received, scroll between them using the left-right arrow keys and
press
Enroll
.
1) Delete: press * or # to select a repeater.
▪ Delete the selected repeater.
2) Delete All: delete all the defined repeaters.
To Next Page
Loading...
