132
Normal Operating Mode
4 Volume adjustment/Muting
• Push the VOLUME + button on the remote control. = The volume increases.
• Push the VOLUME – button on the remote control. = The volume decreases.
• Push the MUTING button on the remote control. = Each time the button is pushed, it switches from MUTING
ON to MUTING OFF, or vice versa.
5 Automatic adjustment of the screen
• During PC signal input, push the AUTO SET UP button on the remote control or main operating panel to automatically
adjust the Menu Mode screen.
(NOTES) • Adjustment is impossible during video signal input. ★ (applies only when equipped with PDA-5002)
• Adjustment is impossible during INPUT 5. ★ (applies only when equipped with PDA-5002)
• It may be impossible to perform adjustment correctly in the case of a low brightness signal such as a
black or blue background.
6 Point zoom
• During PC signal input, push the POINT ZOOM button on the remote control.
= The POINT ZOOM screen appears.
• Select the expanded area and push the SET button.
= The expansion ratio changes as follows each time the button is pushed.
⇒ X1.5 ⇒ X2.0 ⇒ X3.0 ⇒ X4.0 ⇒
During zoom, the display location can be moved by pushing the buttons: 5/∞/5/∞.
Notes) This operation is impossible during video signal input. ★(applies only when equipped with PDA-5002)
7 In addition to the above, several RS-232C commands are also available.
Refer to section 5.5, “RS-232C Adjustment Mode”.
To Next Page
Loading...
Need help?
General