Pioneer XR-P770F Operating Instructions

SETTING THE CLOCK
@ Set the clock when it has been incorrectly set or when power has
been cut to the unit.
e This clock provides a 24 hour display.
@ The clock cannot be set by the remote control unit.
eExample : Setting the clock to 18:40
DISPLAY/RDS | DISPLAY/RDS
CLOCK ADJ CLOCK ADJ
1. Turn the power switch off and press the DISPLAY/RDS
CLOCK ADJ button.
. Keep pressing the DISPLAY/RDS CLOCK ADJ button for
more than 5 seconds.
Set the hour by turning the MULTI JOG.
. Press the ENTER button.
Set the minutes by turning the MULTI JOG.
Press the ENTER button, when “00” seconds of that minute
are reached for precise adjustment.
N
AP w
e@ After connecting to an AC outlet, be sure to set the present time.
Timer playback and timer recording are not possible unless the
time has been set.
10
<ARB7110>
To check the current time
When power is switched OFF, press the DISPLAY/RDS CLOCK
ADJ button.
The current time is displayed for about five seconds.

Pioneer XR-P770F Specifications

Amplifier Section

continuous power output (RMS)	100 W + 100 W
channels	2 channels (stereo)
continuous power output (DIN)	80 W + 80 W

Power

power requirements	AC 230 V, 50/60 Hz
power consumption	530 W
music power (DIN)	115 W + 115 W

FM Tuner Section

reception frequencies (FM)	87.5 MHz to 108 MHz
reception frequencies (AM)	531 kHz to 1, 602 kHz (9 kHz step)
frequency response (Type II tape)	35 Hz to 15, 000 Hz +6 dB

Weight and Dimensions

external dimensions	260 (W) x 310 (H) x 371.5 (D) mm
weight	11.5 kg
antenna input	75 Ω unbalanced