16
PIPER
CHEROKEE
SIX
SERVICE
MANUAL
12
BOLTS 20 TO 25 INCH-POUNDS
NOTE
It may have
been necessary to
use special
landing gear attachment hardware during
assembly of the aircraft due to
manufacturing tolerances, Therefore,
special attention should be given when
removing
hardware to Inspect
and Insure
the same
diameter hardware
Is used upon
reassembly.
Standard
AN4 or AN5
bolts
are replaced by
alternate oversized
bolts
NAS3004 or NAS3005 respectively,
when oversized hardware is required.
44
Figure
GA-8.
Main
Gear
Installation
Revised:
12/15/80
LANDING GEAR
AND BRAKE SYSTEM
2D13
To Next Page
Loading...
