Parts of the SendPro MailCenter
1. The touchscreen allows you to communicate with the device and the built-in postage meter
(Postal Security Device). Your device comes equipped with a 10.2" touchscreen. An optional
15" touchscreen is also available.
2. The Postal Security Device (PSD) contains the funds and performs all of the calculations
necessary to print postage that comply with the latest USPS standards. It is located beneath the
PSD cover on the back of the device.
3. The envelope sealant bottle contains the E-Z Seal® used for moistening envelopes. It is located
under the main cover, on the left.
4. The device uses tape to print reports and postage for packages or pieces of mail that are
outside the limits specified for mailing materials. SendPro® MailCenter, SendPro MailCenter
and SendPro MailCenter systems use adhesive tape only. SendPro MailCenter systems can
use either adhesive or gummed tape. The tape is located under the supplies cover, on the right.
5. The ink cartridges contain the ink used to print postage, as well as any additional items (graphic
ad, text message, return address, etc.) you want to appear on your mailpiece.
Getting Started
Pitney Bowes User Guide January 2023 10
To Next Page
Loading...
