8. Load envelopes and press the Start button, or if printing to tape, press the Tape button.
More information:
l
If you have not loaded the envelopes onto the feeder, or if you need to add more mail to the
feeder, the Run Mail screen shows the message "Waiting for Envelope".
l
If after a certain time you have not loaded envelopes, the feeder will stop and the message
"Stopping..." is displayed.
9. As the system processes the mailpieces, it keeps track of the number of pieces and the total
postage amount. To check or clear the piece count, select the Counter button at the bottom of
the Run Mail screen.
10. If an envelope or tape jams during printing, the system stops and displays the location of the
jam. Once you clear the jam you have to option of printing another envelope or tape.
11. To save any changes you have made to this job, select Save or Save as on the top of the Run
Mail screen.
Preparing and feeding the mailpieces
If your system has WEIGH-ON-THE-WAY® (W-O-W®) (SendPro MailCenter 2000 or SendPro
MailCenter 3000), you do not need to sort your mail. Place the larger pieces on the bottom of the stack
on the feeder. If your mailpieces are sealed, fan them to make sure they are not stuck together as a
result of previous processing.
If you system does not have WEIGH-ON-THE-WAY® (W-O-W®):
Mailing and Shipping
Pitney Bowes User Guide January 2023 37
To Next Page
Loading...
