4. As an example, choose the Attached Scale option. Select OK.
5. Place the package on the scale. The Weighing icon label changes to "Attached Scale" and
shows the weight of the package next to it.
6. Select Class in the Mail Information list box on the left side of the Run Mail screen.
7. Select the appropriate postal class to mail the package.
8. Select the option button for Package.
9. Select any additional services you need from the Extra services list box on the right side of the
screen.
10. Select OK.
11. Select Tape to print a tape with the postage amount.
Printing a date correction
You can print a date correction if you need to modify the date printed on your envelope. If you have
already created a date correction job, open the job and begin running mail.
1. Select the Options button at the bottom of the Run Mail screen.
2. Select Create new job... and then select Date correction.
3. Select OK. A new job tab appears. The Mail Information list is populated with the required date
correction job settings.
Note: The weighing method is not displayed in the postage correction job. Sealing mode is
set to off.
4. If necessary, change the format of the date.
5. If you are printing a tape, select the Tape button.
6. If you are printing on an envelope and if the envelope is sealed, change the sealing method to
sealer off.
a. Turn the piece of mail around 180 degrees so that the postal indicia is in the lower left
corner. Place the envelope on the feed deck with the flap facing down.
b. Select the Start button.
7. To save the job, select the Save As link at the top of the screen.
8. Enter the new job name and select OK.
Mailing and Shipping
Pitney Bowes User Guide January 2023 39
To Next Page
Loading...
