Pitney Bowes SendPro Mailstation - Page 27

IP configuration
l
DHCP (Dynamic IP) is the default setting for the SendPro Mailstation.
l
Static IP may be used. The following fields are available:
o
IP address
o
Subnet mask
o
Default gateway
o
Primary DNS
URL requirements
The following Fully Qualified Domain Names must be allowed through your network for the SendPro
Mailstation device to operate properly. If your firewall has restrictions, please allow access to these
FQDN’s. We recommend these FQDN’s are left open for the device to function.
If possible, please use this wildcard string:
l
*.sl.pb.com
If it is not possible to use the wildcard, please allow access to the following:
l
upgrades.sl.pb.com
l
imp.sl.pb.com
l
agent.sl.pb.com
l
slpb-us-east-1-imp-csd01a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd02a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd03a.boxen.sl.pb.com
l
slpb-us-east-1-imp-csd04a.boxen.sl.pb.com
Reverse lookups of the SendPro Mailstation IP addresses will resolve to Amazon AWS servers.
Amazon AWS is the primary DNS record for the IP address.
Connectivity
Pitney Bowes User Guide October 2021 27