Pitney Bowes SendPro Mailstation - Installing the SendPro Mailstation

Installing the SendPro Mailstation
If you are installing a SendPro Mailstation for the first time, follow these instructions.
1. Before you begin
2. Open the box
3. Unpack the device
4. Select network connection type
5. Set up your PB.com account
6. Install the ink cartridge and run a test pattern
7. Install the scale
8. Enter ZIP Code and security PIN
9. Add postage
Before you begin
Watch this video or follow the instructions below to learn how to install your device.
Before you begin installing your new SendPro Mailstation, you must decide how you plan to pay for
postage and what type of connection (wired or wireless) you wish to use. In addition, you must gather
account and password information.
Choose your postage payment method
Pitney Bowes offers different options to pay for postage for mailing. Decide how you wish to fund
postage on your SendPro Mailstation. Visit Paying for postage for more information.
Choose how to connect to the internet
Wired Connections
l
Take about
10 minutes
to set up
l
Require
access to a
network
port and
power
outlet.
Installation
Pitney Bowes User Guide October 2021 13