Flashing power button
The power button lamp will indicate what your device is doing. Most of these actions are normal for your
device and require no action on your part.
If your power button LED is not steady white, then select the option below that best describes this
light on your SmartLink device.
l White, flashing
l Blue, one flash every two seconds
l Blue, two quick flashes every two seconds
l Blue, rapid flashes
l Red, steady
l Red, flashing
White, steady
What this means
The device is ready.
White, flashing
What this means
The device is initializing, printing, shutting down, or in a cleaning cycle.
Action required
Wait until the action is finished
Blue, one flash every two seconds
What this means
The device is in sleep mode
Using your device
Pitney Bowes User Guide January 2021 25
To Next Page
Loading...
