Pixsys ATR 401 - Page 48

48 ATR401 - User manual
81    Conversion Frequency
Sampling frequency of digital / analogue converter.
NB: Increasing the conversion speed will slow down reading stability
(example: for fast transients, as the pressure, it is advisable to increase
sampling frequency)
 242 Hz (Maximum speed conversion)
 123 Hz
 62 Hz
 50 Hz
 39 Hz
 33.2 Hz
 19.6 Hz
 16.7 Hz (Default) Ideal for  ltering noises 50 / 60 Hz
 12.5 Hz
 10 Hz
 8.33 Hz
 6.25 Hz
 4.17 Hz (Minimum speed conversion)
82  Visualization Filter
Slow down the update of process value visualized on display, to simplify
reading
   Disabled (maximum speed of display update)
 Pitchfork  lter > Default.
     First Order
   First Order with Pitchfork
   2 Samples Mean
  3 Samples Mean
   4 Samples Mean
  5 Samples Mean
   6 Samples Mean
   7 Samples Mean)
   8 Samples Mean)
  9 Samples Mean
  10 Samples Mean
83  Automatic / Manual
Enables automatic / manual selection
   Disabled (Default)