PC
60
SUPPORT
E-PORTAL
FIG-1
E-portal 2 is a PC application that lets you connect to your LV1.6 via
a USB cable. Amongst other things you can use E-portal 2 to:
1
Upgrade the LV1.6 rmware.
2
Change the start-up splash screen.
3
Modify control parameters.
The E-Portal 2 kit comprises a programming adapter, USB cable and
Windows software on CD-ROM. This kit can be purchased from the
website below.
System requirements
Monitor Resolution - 1024x768 or higher
1GHz processor
1Gb RAM
Microsoft® Windows® 7 / Windows® 8 / Windows® 10 1
10Mb of storage space
1 Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Purchase E-Portal 2 from our marker support page:
PLANETECLIPSE.COM/EPORTAL/V2
WARNING!
Ensure the marker is fully unloaded before connecting to a PC. The air system
and loader should be disconnected and any paintballs should be removed from
the breech of the marker.
To Next Page
Loading...
