Planet HPOE-2400G User Manual

SNMP
Object Description
SNMP
Disable or enable the SNMP function. The default configuration is
enabled.
SNMP Versions
Choose specific SNMP version.
The default configuration is SNMPv1, v2c.
Read/Write Community
Allows entering characters for SNMP Read/Write Community of the
PoE+ Managed Injector Hub.
Engine ID
This function with SNMP v1, v2c.v3.
SNMP v3 Security Level
This function with SNMP v1, v2c.v3, the default configuration is
AuthPRiv.
SNMP v3 User Name
This function with SNMP v1, v2c.v3.
SNMP v3 Auth Protocol
This function with SNMP v1, v2c.v3, the default configuration is
MD5.
SNMP v3 Auth Password
This function with SNMP v1, v2c.v3.
SNMP v3 Privacy
Protocol
This function with SNMP v1, v2c.v3, the default configuration is
DES.
SNMP v3 Privacy
Password
This function with SNMP v1, v2c.v3.
Table 4-1-6: Descriptions of the SNMP Objects Screen
System Identification
Object Description
System Name
Allows entering characters for system name of the PoE+ Managed
Injector Hub.
System Description
Allows entering characters for system descrip of the PoE+ Managed
Injector Hub.
System Location
Allows entering characters for system location of the PoE+ Managed
Injector Hub.
System Contact
Allows entering characters for system contact of the PoE+ Managed
Injector Hub.
Table 4-1-7: Descriptions of the SNMP System Identification Objects Screen
SNMP Trap Receiver Configuration
Object Description
SNMP Trap
Allows disable or enable SNMP trap function of the PoE+ Managed
Injector Hub.
SNMP Trap Destination 1
Allows to send SNMP trap to an assigned workstation.
SNMP Trap Destination 2
Allows to send SNMP trap to an assigned workstation.
Table 4-1-8: Descriptions of the SNMP Trap Receiver Configuration Objects Screen

Planet HPOE-2400G Specifications

General

Brand	Planet
Model	HPOE-2400G
Category	Switch
Language	English