- 103 -
Table 5-13 Descriptions of SGSW-2620 802.1x Configuration Per Port Configuration Web Page screen Ob-
jects
After setup completed, please click “Apply” button to take effect. Also can see per port Authorization infor-
mation list in this table.
Please click” Help” button; the following screen in Figure 5-49 appears. Click “Close” to close this screen.
Misc Configuration:
The screen in Figure 5-51 appears. Table 5-14 describes the System Configuration objects of switch.
Figure 5-51 SGSW-2620 802.1x Configuration Misc Configuration Web Page screen
Table 5-14 Descriptions of SGSW-2620 802.1x Configuration Misc Configuration Web Page screen Objects
Description
Port
Select the port by scroll the list in Port column.
State
Select the state of per port. There are four states:
Reject: the specified port is required to be held in the Unauthorized state.
Accept: the specified port is required to be held in the Authorized state.
Authorized: the specified port is set to the Authorized or
Unauthorized state in accordance with the
outcome of an authentication exchange between the Supplicant and the authentication server.
Disable: The specified port is required to be held in the Authorized state.
Description
Quiet period
Set the period during which the port doesn’t try to acquire a supplicant.
TX period
Set the period the port waits to retransmit next EAPOL PDU during an authentication ses-
sion.
Supplicant
timeout
Set the period of time the switch waits for a supplicant response to an EAP request.
Server timeout
Set the period of time the switch waits for a server response to an authentication request.
Max requests
Set the number of authentication that must time-out before authentication fails and the
authentication session ends.
Reauth period
Set the period of time after which clients connected must be re-authenticated.
To Next Page
Loading...
Need help?
General
