- 69 -
5.4.1 IP Configuration
This section allows modify the IP address, Subnet Mask, Gateway of SGSW-2620 and also provide DHCP
Client function. The screen in Figure 5-7 appears.
Figure 5-7 SGSW-2620 modify IP Address Web Page screen
After modifying the new IP address, Subnet Mask, Gateway, please click “Apply” button then the following
screen in Figure 5-8 appears. Click “Reboot” button. SGSW-2620 will reboot to take effect for the new IP
address, Subnet Mask, Gateway.
Figure 5-8 SGSW-2620 Reboot Switch System Web Page screen
Please click” Help” button; the following screen in Figure 5-9 appears.
To Next Page
Loading...
