- 15 -
4.2 Login in
Login is required to access the console interface after the self-test completes successfully. The factory
default user name and password is "admin". You may change it in the Administrator configuration. To
access to the Main Menu, please always enter the correct user name and password. (See Figure 4-2)
Figure 4-2 SGSW-2620 login screen
4.3 Getting Started
4.3.1 General Guidelines
Switch allows users to configure the device via menu screens. To work within the menu, please follow the
guidelines shown in Table 4-1.
Item Description
TAB KEY Choose next item from the console screen.
BACKSPACE
Back to previous item from the console screen.
ENTER KEY
Access the highlighted item from the console screen.
SPACE KEY
When a List item is performed, the Space key starts, the selection and scrolls through the available
choices.
ESC Return to the actions menu.
Table 4-1 General Guideline within the Menu
4.4 Main Menu screen
After login the SGSW-2620, the main menu screen shows as below.
Figure 4-3 SGSW-2620 Main Menu screen
To Next Page
Loading...
