Planet WGR-500 - Product Features

User’s Manual of WGR-500-4P and WGR-500-4PV
10
1.3. Product Features
 Physical Port
 4-port 10/100/1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
 1-port 10/100/1000BASE-T RJ45 for WAN port or LAN port interface ( router mode or switch mode)
 1 x USB 3.0 port for backup and restoration of configuration file
 Power over Ethernet
 Up to 4 ports of IEEE 802.3af/802.3at devices powered
 Supports PoE power up to 36 watts for each PoE port
 Auto detects powered device (PD)
 Remote power feeding up to 100 meters
 PoE Management
- PoE Port status monitoring
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE Port power feeding priority
- Per PoE port power limit
- PD classification detection
- PoE alive check
 Industrial Case and Installation
 Compact size with fixed wall mounting, magnetic wall mounting or DIN-rail mounting
 IP30 metal case
 Supports -10 to 60 degrees C operating temperature
 Supports ESD 6KV DC Ethernet protection
 Dual power input design
- 48V~56V DC wide power input with polarity reverse protect function
- 3-pin terminal block or DC jack connector
 Layer 2 Features
 Supports IEEE 802.1Q tagged VLAN
 Supports IEEE 802.1D Spanning Tree Protocol (STP)
 Layer 3 IP Routing Features
 IPv6 support
 WAN Internet types: Dynamic IP(DHCP Client), static IP, PPPoE, L2TP, PPTP
 Static and dynamic (RIP1 and 2) routing
 Supports Port Forwarding, DMZ, and UPnP for various networking applications
 IP/MAC-based bandwidth control
 Supports Dynamic DNS and PLANET DDNS