Planet WGR-500 - Product Specifications

User’s Manual of WGR-500-4P and WGR-500-4PV
12
1.4. Product Specifications
Product WGR-500-4P WGR-500-4PV
Hardware Specifications
Interface
LAN 4 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
WAN
1 x 10/100/1000 BASE-T, auto-negotiation, auto MDI/MDI-X RJ45 port
LCD Monitor (W x H) N/A
50mm x 37mm, 2-4-inch TFT color
touchscreen
USB Port 1 x USB 3.0 for backup and restoration of configuration file
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection
6KV DC
Enclosure
IP30 metal case
Installation DIN-rail, wall mounting, and magnet
Connector
Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
DC power jack with 2.1mm central pole
LED Indicator
System:
Internet (Green)
PWR (Green)
SYS (Green)
Per 10/100/1000T RJ45 Ports:
10/100 LNK/ACT (Green)
1000 LNK/ACT (Amber)
PoE Usage:
120W (Amber)
90W (Amber)
60W (Amber)
30W (Amber)
System:
Internet (Green)
PWR (Green)
SYS (Green)
Per 10/100/1000T RJ45 Ports :
10/100 LNK/ACT (Green)
1000 LNK/ACT (Amber)
Dimensions (W x D x
H)
180 x 140 x 24.4 mm 180 x 140 x 24.4 mm
Weight 714 g 728 g
Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended)
Power Consumption
Max. 7.3 watts/24.9 BTU (Power on without
any connection)
Max. 132 watts/450 BTU (Full loading with
PoE)
Max. 7.6 watts/25.9 BTU (Power on without
any connection)
Max. 134 watts/457 BTU (Full loading with
PoE)
Router Features
Internet Connection
Type
Shares data and Internet access for users, supporting the following internet accesses:
 PPPoE
 Static IP
 Dynamic IP
Routing Protocol Static routing
RIPv1/2
Security DOS protection
MAC/IP/Port/URL filtering