The cassette should be precisely installed onto the loading block of the STERLINK
mini sterilizer. For the CHAMBER mode operation, the packaged devices are
recommended to be loaded inside the chamber after loading the cassette
(STERLOAD™ mini) for your convenience.
Place the process challenge device (PCD) including a biological indicator at the front
side
of the chamber as depicted in Fig. 4.1, if needed.
Fig. 4.1 Location of PCD with SCBI
WARNING! DO NOT USE IT IF PACKAGING IS DAMAGED.
Do not use it if packaging is even slightly damaged. If the packaging is not
perfectly sealed.
CAUTION! INSERT CI (CHEMICAL INDICATOR).
Insert the CI in the packaging together with the product. After the sterilization
cycle is completed, verify that the product is working properly, and the CI color has
changed color accordingly.
To Next Page
Loading...
