STERLINK mini User Manual
8.1.3. Routine sterilizer maintenance
The usage level of each registered sterilizer will be indicated in the user registered ITS™ system.
When the usage level suggests for sterilizer maintenance, please contact your local Plasmapp
customer support representative.
8.2. Sterilant cassettes
Hydrogen peroxide (formula: H
2
O
2
) contained in the cassettes of STERLOAD™ mini and
STERLOAD™ is designated as a dangerous and hazardous medical waste by the American Environment
Protection Association and should be disposed of in accordance with applicable local regulations. (U.S.
Waste Disposal Regulations: U.S. EPA 40 CFR 262)
CAUTION! HYDROGEN PEROXIDE MAY BE PRESENT.
If a cycle cancels and the items in the load appear wet, hydrogen peroxide may be present.
Wear latex, PVC (vinyl), or nitrile gloves while removing the items from the chamber and
wiping off the items with a damp cloth.
8.3. Shipping, Long-Term Shutdown, and Disposal of the Sterilizer
When the STERLINK mini sterilizer system is reinstalled from initial place to the another, the
system shall be moved by the authorized technicians. If there is no continuous sterilization cycle,
it is required to turn off the power switch of the sterilizer and pull out the power cord from the
power outlet with following storage condition.
When the system is reactivated after long stop, the user shall contact the manufacturer of the
sterilization system and the authorized person of the manufacturer to take a proper instruction.
Moreover, the equipment shall not be reinstalled where the power cord is difficult to handle. In the
To Next Page
Loading...