EasyManua.ls Logo

Plasmapp STERLINK mini - Sterilant Cassettes

Plasmapp STERLINK mini
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev. 02 (May 2023)
Plasmapp Co., Ltd.
STERLINK mini User Manual
18
printer can be placed in the drawer of the cart and can be moved easily using the handle.
3.5. Sterilant cassettes
The STERLINK mini system has one mode (CHAMBER mode) which is automatically initiated
by the sterilizer according to the barcoded printed on the STERLOAD™
mini sterilant cassettes.
The barcode contains information of the type and date of manufacture of the sterilant cassette.
Figure 3.7 Sterilant cassette of STERLOAD™ mini
Each cassette has two cells of sterilant which each cell contains precisely measured amount of
hydrogen peroxide solution, and the two cells are used for repeating the same sterilization phases
WARNING! ELECTRIC SHOCK HAZARD
To avoid the risk of electric shock, this product must only be connected to a power supply
with protective ground.
WARNING! USE OF PRINTER & CABLE
Use of accessories, cables other than those specified or provided by the manufacturer of this
equipment could result in decreased electromagnetic compatibility of this equipment and result
in improper operation.
WARNING! INSTALLATION POSITION.
Use of this equipment adjacent to or stacked with other equipment should be avoided because
it could result in improper operation. If such use is necessary, this equipment and the other
equipment should be observed to verify that they are operating normally.
Barcode and date of manufacture

Table of Contents

Related product manuals