Chapter 9. Troubleshooting
Most sterilizer operating problems are accompanied by a system message. These messages are useful
in determining the source of the problem. In many causes you can take remedial actions to correct the
source of the problem and thereby return the sterilizer to normal operation. If you are unable to identify
the cause and solve the problem, please contact Plasmapp or your local Plasmapp customer support
representative.
9.1. User errors
The STERLINK mini sterilization system is designed to provide alarm messages with the intuitive
figures representing the predictable source for the user errors. When the user confirms, the error
should be checked and understood by the user. If the problems persist, please contact Plasmapp or
local Plasmapp customer service representative.
Fig. 9.1 Screen showing user errors
To Next Page
Loading...
