Plasmapp STERLINK mini - Page 57

Rev. 02 (May 2023)
Plasmapp Co., Ltd.
STERLINK mini User Manual
57
C2. Technical specification
Classification
Description
Unit
Dimensions
Main: 275 (W) x 440 (D) x 330 (H)
Pump Module: 275 (W) x 440 (D) x 330 (H)
mm
Chamber volume
7
liter
Safety Device
Physical
Opening prevention by door sensor and vacuum
Electrical
Insert rated fuse for overcurrent prevention
Process variable
Cycle Temperature
< 60
o
C
Pressure range
0 – 760
torr
Base pressure
< 3.0
torr
Diffusion pressure
20 – 100
torr
Process verification
Chemical indicator
(CI)
Class 1
(Compliance: ISO 11140-1)
Process
verification
Vacuum
Base pressure
< 3.0
torr
Vacuum leakage
< 0.1
torr/sec
Cycle time
CHAMBER mode
SR™/SC™ Process
8
min
Sterilization Process
10
min
Overall Cycle
18
min
Sterilant
Hydrogen peroxide (H
2
O
2
58 – 59.5%)
-
Purification
Plasma discharge treatment (Low frequency)
-
Display
Size
153.1 (W) x 85.6 (H)
mm
Resolution
800 x 480
pixel
Port
IEC-320 C14, RJ-45, USB type A, USB type B, cable connector
-
Electrical
characteristic
Rated power
100-125 VAC, 10 A
-
Rated frequency
50/60
Hz