Plustek PS188 - Save Setup Dialog Box (for Scan Button Settings)

Button Configuration Window Overview 25
All rights are reserved.
linked application.
This name will be displayed in the Application's drop-down menu in the Button
Configuration window.
Memo
Optionally you may enter
a short description here.
Command Line
Enter the command li
ne
and add %1 at the end of the command line
to perform
a
specific task if you have such information for the selected application
program. It is recommended that you leave this field blank if you will not use or
are unsure of the command line.
2.6.2
Save Setup dialog box (for Scan Button Settings)
Within the Button Configuration window click the
Scan
icon on the left pane and
then click
in the right pane, which opens this dialog box.
The items and parameters available in the window are explained as follows:
Saving Folder
The scanned documents or images are saved to the folder displayed here.
To select or modify the saving folder, click
to open a dialog box where you
may browse your disk drives to select a desired saving folder. This newly
added saving folder will be added to the drop-down menu. Next time when you
want to use this folder again, you may simply click to select it from this drop-
down menu.
File Name
You are allowed to name the saved files in two ways:
·
using the "Date and Time" format; or
·
using customized prefix and numbering scheme.
You can see the file naming example on screen--near the bottom of this dialog
box--immediately after you make any adjustments. The file name extension is
automatically added according to the file format you set up.