Plustek PS188 - File Format Configuration Dialog Box

MacAction Help46
All rights are reserved.
2.10
File Format Configuration dialog box
Within the Button Configuration window click the
File
,
Scan
,
FTP
or
E-Mail
icon
on the left pane and then click
in the right pane, which opens this
dialog box.
The items and parameters available in the window are explained as follows:
Keep the same image quality level for all modes
Ticking this check box will unify the quality level for all scan modes, thus saving
you the trouble of adjusting the quality level individually. If you prefer to
manually adjust the image quality level for different modes, leave this check box
cleared.
Keep the same PDF setting for all modes
Ticking this check box will unify the PDF setting for all scan modes, thus saving
you the trouble of individually ticking or clearing the PDF check box. If you
prefer different settings for different scan modes, leave this check box cleared.
Image Quality
For
JPEG
file format, you can set the quality level individually for Color and
Grayscale scan modes.
You can adjust the quality value from 1 to 100. The higher the quality setting,
the more detail is preserved, but a larger file size it would take. The smaller the
image file, the lower quality the image has, but the less disk space it takes. The
balance of image quality and file size needs to be determined according to your
own needs.
If TIFF/PDF is chosen as the file format, you have two options to save the
scanned images:
·
Generate one
TIFF/
PDF file for all pages: save all the scanned images
into one file; or
·
Generate one
TIFF/
PDF file every X pages: save every X pages as a file.
You can define the number of pages to be combined in a file.