Plustek PS188 - Configure Button Settings; How to Configure Button Settings; Part III Using the Scanner Buttons

Using the Scanner Buttons 47
All rights are reserved.
3
Using the Scanner Buttons
Conditions for buttons to work properly
The following conditions are required for the on-screen MacAction's execute
menu to work properly.
·
OCR
: The OCR application program provided on our scanner CD-ROM
must be installed on your computer.
·
Scan
: An application program must be selected to link with the Scan
button.
·
Copy
: A printer must be connected and the printer driver has been
correctly installed in Mac OS.
·
PDF
: The OCR application program provided on our scanner CD-ROM
must be installed on your computer.
·
FTP
: A FTP server must be correctly configured to connect with your
scanner and your computer.
3.1
Configure Button Settings
Before performing your first scan via scanner buttons, you are recommended to
configure the button settings to your needs and preferences first.
Refer to the "Preparing Documents" section of the Scanner
User's Guide to choose an appropriate method to scan your paper
documents.
3.1.1
How to Configure Button Settings
Within the "Button Configuration" window, you can find a row of icons running
through the left side of the window. Each icon represents a scanning task, and
the number underneath corresponds to the function number displayed on the
scanner front panel. Nine frequently-used scanning tasks are pre-configured for
your convenience to start scanning immediately. You may, however, customize
the settings of every nine tasks to best meet your needs and preferences.
1.
Do one of the following to open the Button Configuration window:
·
Double-click the icon
in
Finder
>
Applications
>
Plustek
>
Your
scanner model name
.