Plustek PS188 - Page 87

Using the Scanner Buttons 49
All rights are reserved.
are recommended to configure the button settings to your needs and
preferences first.
Scan from the Scanner Buttons
1.
Place the
document or images
onto the scanner
. (Refer to the Scanner
User's Guide for more information in placing paper into the ADF properly.)
2.
Check current button settings by viewing the Button Configuration window.
If needed, you may also modify settings to meet your current needs.
3.
Press the up or down button to select the desired task.
4.
Press the
Scan
button.
The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Place only
text documents
for OCR purposes. Do not scan a
photo using the OCR button.
View Button Settings
There are three ways to view the button settings:
·
Double-click the icon
in
Finder
>
Applications
>
Plustek
>
Your
scanner model name
.
·
Click the icon
in the Dock.
·
Right-click
the icon
in the Dock, and then choose
Button
Configuration...
in the pop-up menu that opens.
Scan from the
On-screen
Mac
Action's Execute Menu
You may also use
Mac
Action's on-screen Execute menu to perform the same
scanning tasks.
The
Mac
Action program provides a quick and convenient way to
perform various scanning functions.
Follow the steps described below:
1.
Place the document or images onto the scanner.
2
.
Check current button settings by viewing the Button Configuration window. If
needed, you may also modify settings to meet your current needs.