OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 41
Selecting a Test Frequency of WEEKLY creates a repeating test that will run once a week at the
configured start time displayed. Controls are provided for selecting which Day of the Week, the Start
Time, and Test Length. If the test requires a minimum % Volume, be sure to check the box to establish
that requirement. The test will NOT run if the percent volume is below this threshold. The percentage
value is configured in the Setup/Config/Tanks/Leak Test menu (See Section 2.8).
To Next Page
Loading...