OPERATION MANUAL TMS4000
TMS4000 Operation Manual 2018-08-03.docx August 3, 2018
PAGE 66
Each individual Serial Port can be configured for the following settings with the defaults shown above:
• Baud Rate: the connection speed required to communicate to the attached device
• Serial Format: Presented in the form of Parity, Data Bits, and Stop Bits. Special formats are
available to support the external LS300 Line Leak console in both 4 and 8 channel
configurations.
• Security Enable: Requires a 6-digit numeric Access Code that is prepended to any command
issued to the TMS.
Serial Port A & B are integrated onto the Processor Card of the TMS4000. Serial C & D are optional
ports found on select 900571-x communications expansion cards.
To Next Page
Loading...