Polaris 850 PRO-RMK 155 2020 User Manual

3.144
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
AIR INTAKE PLENUM INSTALLATION
1. Install the intake plenum
q
.
2. Connect the ECU connectors
w
to the wiring harness
or install the ECU mounting fasteners.
3. Connect the strain relief
e
retaining the wiring
harness to the intake plenum.
4. Install the push rivets
r
retaining the intake tube to
the intake plenum.
5. Install the torx fasteners
t
and push rivets
y
retaining the intake plenum. Torque the fasteners to
specification.
NOTICE
Image for reference only. Console configuration may
vary slightly based on model.
TORQUE
Upper Plenum Fasteners:
7 ft-lbs (10 Nm)
6. Install the side panels and hood.
ENGINE / COOLING / EXHAUST

Polaris 850 PRO-RMK 155 2020 Specifications

General

Brand	Polaris
Model	850 PRO-RMK 155 2020
Category	Snowmobiles
Language	English