Polaris 850 PRO-RMK 155 2020 - Page 355

3
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
3.155
10.Install the exhaust spring
r
securing the rear of the
resonator in place.
11. Install the exhaust spring
t
fastening the front of the
resonator to the chassis.
12.Install the exhaust spring
y
fastening the right side
on the tuned pipe in place.
13.Install the exhaust springs
u
securing the tuned pipe
to the resonator.
14.Connect the EGT sensor
i
to the wiring harness.
15.Properly route and secure the slack in the EGT
sensor wire to the main harness with a new cable ties
o
.
ENGINE / COOLING / EXHAUST