2
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
2.27
GREASE LUBRICATION POINTS
There are grease fittings on the front stabilizer bar mounts, rear stabilizer bar mounts, and on the prop shaft slip yoke.
Apply grease until all traces of water have been purged out at each of these areas.
ITEM METHOD RECOMMENDED LUBE
FREQUENCY
Rear Stabilizer Bar
Bushings
Grease two fittings through the skid
plate access holes on each side of
the vehicle
e
Polaris All Season Grease
Grease fittings every 500
miles (800 km); Grease
before long periods of
storage, and after
thoroughly washing or
submerging the vehicle
Propshaft Yokes
Grease fittings
r
on the slip yoke
Polaris Premium U-Joint
Grease
MAINTENANCE
To Next Page
Loading...
Need help?
General
