Polaris RZR PRO XP 2021 User Manual

3
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
3.15
MUFFLER REMOVAL
1. Remove six fasteners
q
retaining the muffler cover /
rear fascia .
2. Remove two muffler springs
w
.
3. Remove three fasteners
e
retaining the muffler to the
exhaust pipe.
4. Pull muffler towards the rear of the vehicle to remove
it from the mounting grommets.
MUFFLER INSTALLATION
1. Install the muffler studs into the mounting grommets
on the chassis.
2. Install a new muffler gasket and install the three
fasteners retaining the muffler to the exhaust pipe.
Torque fasteners to specification.
TORQUE
Exhaust Pipe Fasteners:
18 ft-lb (24 Nm)
3. Install the two muffler springs.
4. Install the rear fascia / muffler cover. Torque fasteners
to specification
TORQUE
Rear Fascia / Muffler Cover Screws:
8 ft-lb (11 Nm)
ENGINE / COOLING SYSTEM

Polaris RZR PRO XP 2021 Specifications

General

Brand	Polaris
Model	RZR PRO XP 2021
Category	Offroad Vehicle
Language	English