Polaris RZR PRO XP 2021 User Manual

12
9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
12.29
TAIL LIGHT REPLACEMENT
Before replacing the taillight(s), use a digital multi-meter
to test the harness to ensure the lamp is receiving 12
volts and that a ground path is present.
REMOVAL
1. Disconnect the wire harness
q
.
2. While holding the taillight assembly, remove the three
nuts
w
retaining the taillight assembly and remove it
from the rear fascia.
INSTALLATION
1. Reverse the removal procedure for tail light
installation.
TORQUE
Tail Light Mounting Fasteners:
24 in-lb (3 Nm)
DASH LIGHT
The LED light will remain ON for approximately 30
seconds after key has been switched to the OFF
position.
ELECTRICAL

Polaris RZR PRO XP 2021 Specifications

General

Brand	Polaris
Model	RZR PRO XP 2021
Category	Offroad Vehicle
Language	English