To Next Page

To Previous Page

7.12

9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual

7. Remove the two sector gears.

NOTICE

Note the timing marks on the shift gears for reassembly

purposes.

8. Remove transmission case bolts

9. Using the three designated pry points shown in the

image, separate the transmission case halves.

CAUTION

Do not pry on the transmission case mating surfaces or

the transmission cases will be damaged and leak oil

after it is reassembled.

10.Lift up on the shift shaft rail

and move the rail

assembly rearward to allow the shift fork pins to be

removed from the shift drum

. Remove the shift

drum from the transmission housing.

11. Remove the shift shaft and forks as an assembly.

12.Remove the rear output shaft assembly

by lifting

underneath the gear or by tapping the shaft from the

opposite side.

13.Remove the idler gear assembly

14.Remove the input shaft assembly

15.Remove the reverse shaft assembly

16.Remove the idler shaft assembly

TRANSMISSION

Polaris RZR PRO XP 2021 User Manual

Questions and Answers: