To Next Page

To Previous Page

11.24

9850068 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual

4. Adjust the door until the front latch is centered both

vertically and horizontally on the striker rod as shown.

NOTICE

If it is difficult to center vertically and horizontally, loosen

striker assembly fasteners

for extra adjustment.

Once aligned, torque striker fasteners.

TORQUE

Door Striker Fasteners:

7 ft-lbs (10 Nm)

5. Holding the door in position, tighten the top hinge

bracket fasteners

, and then the bottom fasteners

. Torque to specification.

TORQUE

Hinge Bracket Fasteners:

18 ft-lbs (24 Nm)

6. Install door panel onto the door frame. Torque

fasteners to specification.

TORQUE

Door Panel Fasteners:

35 in-lbs (4 Nm)

TORQUE

Door Trim Bracket Fasteners:

18 in-lbs (2 Nm)

BODY / FRAME

Polaris RZR PRO XP 2021 User Manual

Questions and Answers: