MAINTENANCE
2.7
SPECIAL TOOLS, CONT’D
2460761 Hall Sensor Probe Harness 10
2871745 Static Timing Light Harness 10
NOTE: Polaris dealers can order the tools listed above through their Polaris Special Service Tools catalog.
LUBRICATION
Ill.
#
Item
Lube Required Method Frequency*
1 Engine Oil
Polaris 0W--40
Synthetic (PN
2871567)
Add oil to proper level. Change after 1st month, 6 months or 100
hours thereafter; Change more often (25-50
hours) in extremely dirty conditions, or short
trip cold weather operation.
2 Transmis-
sion
Polaris Synthetic
Gear Case Lubricant
(PN 2871478)
Add lube to FULL level on dipstick. Change annually ©
3 Brake Fluid
Polaris DOT 3 Brake
Fluid (PN 2870990)
Fill master cylinder reservoir to indi-
cated level inside reservoir.
As required. Change fluid every 2 years.
4 Front Gear-
case Oil
Premium Front Gear-
case Lube (PN
2871653)
Add to bottom of fill plug threads. Change annually©
* More often under severe use, such as operated in water or under severe loads.
¡ Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
© Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
¢ Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
Mobilegrease Special
Operating Range
2. Transmission
1. Engine Oil and Filter
3. Brake Fluid (Left hand Master Cylinder)
Transmission Dipstick
Full
Master Cylinder
Reservoir
Dipstick
Filter
4. Front Gear Case Fill Plug
Fill Plug
Enfocus Software - Customer Support
To Next Page
Loading...
