Polaris Sportsman XP 1000 S 2020 - Wheel Studs; Wheel Stud Service

8
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
8.5
WHEEL STUDS
WHEEL STUD SERVICE
To ensure proper wheel stud replacement, follow the
procedure outlined below.
IMPORTANT
Use a calibrated torque wrench when servicing wheel
studs.
IMPORTANT
All parts must be clean, dry and free of oils / lubricants.
Wheel studs / lug nuts must be dry to ensure proper
torque.
1. Stop engine, place machine in Park and set parking
brake.
2. Properly raise and support vehicle.
CAUTION
Serious injury may result if machine tips or falls. Be
sure machine is secure before beginning this service
procedure. Wear eye protection when removing and
installing bearings and seals.
3. Remove the wheel nuts
q
, wheel
w
, and tire
e
from
the hub
r
.
4. Remove any damaged stud (s)
t
from hub
y
and
discard.
5. Obtain new wheel stud(s). Thoroughly clean stud to
remove all oil.
6. Clean brake disc
u
and hub
i
.
FINAL DRIVE