Fuel Injection System
8.24
Fichtâ Fuel Injection System -- Diagnostic Software
Using the Polaris Diagnostic Software: PODIAG
1. Turn on your laptop, and allow the operating system to
boot--up.
2. Double--click on the PODIAG MSDOS icon located on
the desktop.
3. The PODIAG program will start. The first screen will
look like the screen to the right.
Changing a Com Port
The program can be configured to use any com port.
The initial default is com 1. Consult the documenta-
tion for your computer to determine the name of the
port you have plugged the diagnostic communication
cable into. Set the diagnostic program to use the same
port.
To change the default com port, press the F3 key from
the Title screen or the Main Menu. This will cause the
Com Port screen to display. The Select Com Port
screen displays a numbered list of com ports. Type the
com port number you desire. When you exit the Com
Port screen, a message informs you to restart the pro-
gram for the new default com port setting to take affect.
Selecting a Display Mo d e
By default, the program starts with a monochrome display. This ensures compatibility with the widest array
of available laptop computers. If you are using a color display, press F2 to switch to the color mode.
NOTE: The com port and screen mode (color or monochrome) that is being used, when the program is shut down,
will automatically be used the next time you start the program.
SELECT COM PORT
1) COM 1
2) COM 2
3) COM 3
4) COM 4
X) EXIT
SELECT 1 THRU 4 OR X
To Next Page
Loading...